Timber Tilt And Turn Windows

Timber Flush casement windows offer clean lines and classic finishes to suit a wide variety of homes, from ultra-contemporary residences to characterful older buildings. With smooth lines, they sit beautifully within the frame, but they offer more than just sleek aesthetics – they are Secured By Design (SBD) certified too.

They can open outwards or top or side hung and can be supplied fully reversible to enable external glass to be cleaned safely from the inside – perfect for high-rise developments.

We offer four glass options mounted in hardwood of softwood frames. Double and triple glazing is available, and the Uw rates for thermal containment will impress. With double gasketing, weather containment is assured; and beading is mounted internally to enhance security.

Engineered redwood – Standard. Engineered hardwood, Accoya, European oak.
Internal Finish
Three coat spray applied factory finish using water based micro-porous paint/ stain.
External Finish
Polyester Powder coating.
White – RAL 9016 – Standard. Any RAL – from RAL classic range. Stain – from TRC stain range.
Double glazed, 4/16/4 Low-E – Standard.
1.2 W/m²K double glazed – 0.8 triple glazed W/m²K.
Perimeter spacer bars
White warm edge perimeter spacer with white warm edge integral spacers – Standard. Silver and Black spacer optional.
Frame profile moulding
Ovolo 26mm.
Trickle ventilation
Through sash head trickle ventilator. EA 1700, 4400, 5000 mm²
Can conform to PAS 24
78 x 78 mm – Standard. 92 x 78 – Optional for Enhanced Thermal performance. Manufactured using mortise and tenon joints, glued and mechanically fixed.
78 x 78 mm – Standard.
Sill projection
50 mm, 60 mm, 70 mm, 80 mm, 90 mm, 100 mm, 110 mm
Wood moisture content
Glazing beads
Internally Beaded,

Performance information on Timber Tilt & Turn windows is detailed in the table below.

Scroll to Top